Network
Once you have the required hardware ready, you can start with installation. We recommend to mark each device, so it is clear what name does each device have and to which node it belongs.
Use the Component Diagram as a guide for how to plug different components into your network. Choose the one matching your relay type. The Edge cameras needs to be plugged into POE (Power over Ethernet) ports on your POE switches.
IP Address Configuration
After the devices are physically connected into the network we can set up the IP addresses for each device. Below is a table of IP addresses used for this package to make it run out of the box. On each device set the manual IP address as below and use the subnet mask: 255.255.255.0 and the default gateway: 192.168.17.1.
| Central Devices | IP Address | Description |
|---|---|---|
| Raspberry Pi - SmartFace Server | 192.168.17.11 | Central SmartFace Server |
| Aeos Server | 192.168.17.12 | Central Aeos Server |
| Configuration for Door #1 | IP Range | Description |
|---|---|---|
| Camera | 192.168.17.21 | Local Camera used within the 1st door location |
| Aepu | 192.168.17.22 |
| Configuration for Door #2 | IP Range | Description |
|---|---|---|
| Camera | 192.168.17.31 | Local Camera used within the 2nd door location |
| Aepu | 192.168.17.32 |
Firewall Configuration
Ensure the devices can communicate with each other within your network. Firewall rules changes might be necessarry.